,

Horizontal Auger Assy,impurity (W3.5H-02-11-02-01-00)

horizontal impurity (chaff) auger assembly. In-stock replacement for the FM WORLD harvester. Order by part number; contact us for exact fitment.

Horizontal Impurity Auger W3.5H-02-11-02-01-00 — 1110 mm, 8.2 kg

This is the horizontal auger that moves the impurity fraction across the wider cleaning frame of the FM WORLD 4LZ-6.0P Ruilong. At 1110 mm long and 8.2 kg it is the larger counterpart to the 4.0E impurity auger, with the helical flight welded to a central tube and a 25 mm shaft running through the assembly. It keeps chaff and tailings flowing toward the return path so the larger sieves stay clear during a full-width cut.

Specifications

Part numberW3.5H-02-11-02-01-00
TypeHorizontal impurity auger assembly
Overall length1110 mm
Flight width170 mm
Outer / shaft diameter95 mm / 25 mm
Weight8.2 kg
FitsFM WORLD 4LZ-6.0P (Ruilong) Combine Harvester
AvailabilityIn stock, ready to ship

What this auger does

Because the 6.0P runs a wider, heavier crop flow, this auger’s flight carries more abrasive material over a longer span. The leading face and outer edge of the helix thin first, and once the edge clearance grows the auger starts recycling material instead of conveying it, which is felt as uneven loading across the cleaning shoe. The full assembly is replaced when the flight or tube is worn or bent.

The 6.0P horizontal impurity auger against the 4.0E version

At 1110 mm and 8.2 kg with a 170 mm flight width, this is sized for the 6.0P, against the 935 mm, 5.9 kg, 117 mm-wide 1597 auger on the 4.0E. Mount centres and bearing journals are specific to each frame, so the two cannot be swapped even though both convey impurity.

Fitting notes

Drop the weldment into a freshly cleaned trough and locate the bearings without locking them off. With the drive chain back on, work the shaft through several manual turns and watch how the helix travels its whole span; it should float with a uniform gap and never touch the trough. Once that free run is confirmed, the mounts can be tightened. Grease and oil follow the manual’s schedule at the bearings and drive, while the conveying helix stays unlubricated so grit cannot cling to it.

Before you fit it

Inspect the drive chain and sprocket as well as the auger, since a slipping drive can mimic a worn flight.

Signs it needs replacing

  • Uneven or enlarged flight-to-trough clearance from a worn outer edge
  • Impurity carry-over and chaff building across one side of the shoe
  • A bowed tube causing the flight to rub at one point
  • Play or noise in the end bearings from worn journals

Compatibility and cross reference

Models covered

Listed for the FM WORLD 4LZ-6.0P Ruilong; confirm the 1110 mm length and 25 mm shaft before ordering.

Confirming the right part

Match W3.5H-02-11-02-01-00 and 1110 mm. A 935 mm part is the 4.0E 1597 and will not fit this frame.

Reading the old part

1110 mm overall, 170 mm flight width, 95 / 25 mm diameters, 8.2 kg. The 170 mm flight is the widest in the impurity family here, so compare flight width first and length second when sorting it from the 935 mm return auger.

Questions we are asked about this auger

Why does my cleaning shoe keep loading up even after clearing it?

A worn impurity auger that has lost its edge clearance stops moving material across, so chaff returns and builds under the sieves. Check the flight edge and trough before assuming the problem is only blockage.

Related parts