,

Piston Pin (4G33TC-050004A)

Piston Pin (4G33TC-050004A). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Piston Pin 4G33TC-050004A for FM WORLD 6.0P

This is a hollow hardened steel piston pin for the 4G33TC engine in the FM WORLD 4LZ-6.0P, outer diameter 32 mm, inner bore 15 mm, length 76 mm, weight 0.39 kg. It joins the piston to the small end of the connecting rod.

Specifications

Part number4G33TC-050004A
TypeHollow hardened piston pin
Outer diameter32 mm
Inner bore15 mm
Length76 mm
Weight0.39 kg
FitsFM WORLD 4LZ-6.0P (Ruilong), 4G33TC engine
Availabilityin stock, ready to ship

What this part does

The pin carries the full firing load from the piston to the connecting rod, so it is made hard and smooth and is lubricated through the piston and rod. Depending on the engine design it may be a full-floating pin retained by circlips or a press fit in the rod small end; the service manual defines which. The hollow form keeps it light while keeping the outer surface rigid.

The pin against the circlips

The pin is the load-bearing part, while the circlips only stop a floating pin from sliding sideways. They are separate parts and one cannot be substituted for the other; new circlips should be fitted whenever a floating pin is removed.

Fitting notes

Work with clean bores and follow the fit method in the manual, heating the rod or using the correct tool where a press fit is specified. For a floating pin, seat new circlips fully into their grooves and lubricate the pin and small end with clean engine oil.

Before you fit it

Inspect the pin surface and the piston and rod bores for scoring, polish, or looseness. A pin that is already worn in its bores will knock even if the new pin itself looks sound.

Signs this part needs replacing

  • A sharp wrist-pin knock, often clearest when the engine is cold
  • Visible wear or a polished groove in the pin or small-end bushing
  • Looseness between the piston and the connecting rod
  • Seizure or scuffing after loss of lubrication

Compatibility and cross-reference

Where it fits

Between the piston and the connecting rod small end in the 4G33TC engine of the FM WORLD 4LZ-6.0P.

Confirming the correct part

Confirm by part number 4G33TC-050004A and the 32 mm outer diameter that matches the piston pin bore.

Reading the old part

Measure the outer diameter and length and check the smooth hardened surface. The 32 × 76 mm hollow pin identifies the part without a tag.

Frequently asked questions

Why is the pin hollow?

The hollow centre removes weight while the hardened outer surface keeps the strength and stiffness needed to carry the firing load.

How is the pin held in place?

It is either a full-floating pin retained by circlips or a press fit in the rod small end, depending on the engine. The service manual gives the correct method for the 4G33TC.

Related parts