Telescopic Teeth Shaft W2.5E-01B-01-02A-05 (999.5 mm, 25 mm Diameter)
The W2.5E-01B-01-02A-05 shaft for telescopic teeth is 999.5 mm long, 25 mm in diameter and 2.9 kg, supporting the telescopic tooth arrangement.
Telescopic tooth support data
| Part number | W2.5E-01B-01-02A-05 |
| Component | Telescopic teeth shaft |
| Length | 999.5 mm |
| Diameter | 25 mm |
| Mass | 2.9 kg |
| System | Header conveyor |
Telescopic teeth shaft role
The shaft locates and supports the telescopic teeth so they can move through their intended extending and retracting path.
Telescopic teeth shaft differences
The eccentric shaft controls offset adjustment, while this shaft provides the support axis for the telescopic teeth.
Telescopic teeth shaft installation
Inspect each tooth contact area before installation and confirm the shaft is straight. Feed it into position carefully to avoid damaging the teeth or guides.
After assembly, cycle the telescopic mechanism and check for tight spots, tooth drag or side contact.
Telescopic teeth shaft wear checks
- Worn tooth contact area
- Scored 25 mm surface
- Bent shaft
- Damaged guide
- Corrosion at a support point
- Uneven tooth movement
Telescopic teeth shaft ordering checks
W2.5E telescopic tooth mechanism.
Use W2.5E-01B-01-02A-05 as the order reference, and verify the 999.5 mm length, 25 mm diameter and 2.9 kg mass.
Match the tooth locations, support seats, diameter and exact length with the old shaft.
Telescopic teeth shaft related parts
Telescopic teeth shaft questions
Why is the 999.5 mm length important?
The precise length affects tooth positioning and clearance in the telescopic mechanism.
Are the teeth included?
The source identifies the shaft, not a separate set of teeth.
Identification of W2.5E-01B-01-02A-05 before ordering
Choose this shaft when the telescopic teeth no longer move smoothly or the original shaft is scored, bent or worn.





