,

Electronic Sensor, Oil Pressure (W2.0-06-01-18-00)

Replacement part for FM WORLD 4LZ-6.0P. Verify fitment by part number W2.0-06-01-18-00 and contact us for ordering support.

Electronic Oil Pressure Sensor W2.0-06-01-18-00 (50 mm, 24 mm Body)

The W2.0-06-01-18-00 electronic oil pressure sensor, 50 mm long with a 24 mm body diameter and 0.06 kg mass, monitors engine lubrication pressure and feeds the reading to the warning or display circuit.

Oil pressure sensor data

Part numberW2.0-06-01-18-00
ComponentElectronic oil pressure sensor
Length50 mm
Body diameter24 mm
Mass0.06 kg
Measured valueEngine oil pressure

Monitoring lubrication pressure

Engine oil pressure acts on the sensing element, which produces the electrical response used by the instrument or warning circuit. This lets the operator see a loss of normal lubrication pressure and stop before engine damage develops.

Oil pressure sensing versus speed sensing

W2.0-06-01-18-00 measures oil pressure, while W2.0-06-01-16-00 measures rotating speed. The oil sensor is the shorter 50 mm unit with a 24 mm body; the speed sensor is 155 mm long with a 25 mm body.

Replacing the pressure sensor

Stop the engine, let hot components cool and disconnect the plug. Remove the old sensor from its original port, then fit the replacement with clean threads and reconnect the electrical plug securely.

Do not apply sealing material where it could enter the oil passage. Start the engine, inspect the connection for leakage and confirm that the pressure indication or warning state responds correctly.

Why pressure readings become unreliable

  • Age-related drift of the sensing element
  • Oil contamination affecting the pressure inlet
  • A loose or corroded electrical connector
  • Thread or housing damage during removal
  • Oil seepage at the sensor connection
  • An intermittent reading caused by vibration-damaged wiring

What to confirm

Mounting: Engine oil pressure monitoring on the FM WORLD 4LZ-6.0P combine harvester.

Confirmation: Quote W2.0-06-01-18-00 and confirm the 50 mm length, 24 mm body and 0.06 kg mass.

Dimensions to match: Match the pressure-port threads, electrical plug, 50 mm length and 24 mm body to the original sensor.

Related engine monitoring parts

Oil pressure questions

Does a new sensor correct low engine oil pressure?

No. It only reports pressure. Low oil level, a lubrication fault or an engine problem must be diagnosed separately.

How is it identified against the speed sensor?

Use the part number and dimensions: this unit is 50 mm by 24 mm, while the speed sensor is 155 mm by 25 mm.

Identification of W2.0-06-01-18-00 before ordering

Select W2.0-06-01-18-00 only after checking the actual engine oil level and pressure indication; a warning caused by low oil or a wiring fault will not be cured by fitting a sensor.

Request a Quote Now