Crankshaft Thrust Piece Kit for FM WORLD 6.0P
This is a crankshaft thrust bearing set for the engine in the FM WORLD 4LZ-6.0P, supplied as a kit, package size 92 × 40 × 30 mm, weight 0.1 kg. The thrust pieces control how far the crankshaft can move lengthwise inside the block.
Specifications
| Part number | 4B28V16-030010 & 4B28V16-030009 |
|---|---|
| Type | Crankshaft thrust bearing set |
| Package size | 92 × 40 × 30 mm |
| Weight | 0.1 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | in stock, ready to ship |
What this part does
While the main bearings support the crankshaft radially, the thrust pieces carry the axial load. They sit in a machined groove and present a smooth bearing face to the crankshaft thrust surface, so the shaft can still rotate while its fore-and-aft movement is held within a small, controlled range. A certain amount of end play is normal and allows room for thermal expansion; the thrust faces keep that movement from growing beyond the design limit.
Thrust faces against the main bearings
The main bearings are full shells that wrap the journals and carry the rotating load. The thrust pieces are flat or semi-circular faces whose only job is the sideways load, which is why they are a separate part rather than another shell bearing.
Fitting notes
Fit the thrust pieces into their correct grooves with the bearing faces oriented toward the crankshaft and lubricate them with clean engine oil. Keep the locating tabs seated and follow the assembly sequence and end-play check in the service manual rather than measuring by feel.
Before you fit it
Inspect the crankshaft thrust surface and the block groove for scoring or wear before fitting. Worn thrust surfaces will open the end play again even with new pieces.
Signs this part needs replacing
- Excessive crankshaft end play, felt as fore-aft movement or a clunk
- Vibration and noise from the crankshaft moving on its axis
- Thrust faces worn thin or scored
- Accelerated wear of the main bearings from the shaft walking
Compatibility and cross-reference
Where it fits
Crankshaft thrust groove inside the engine of the FM WORLD 4LZ-6.0P.
Confirming the correct part
Confirm by the kit part numbers and the thrust groove and crankshaft thrust surface of the engine before ordering.
Reading the old part
Identify the pieces by their flat thrust faces and locating tabs, and match them to the groove rather than relying on the packaging.
Frequently asked questions
What is crankshaft end play?
It is the small axial movement of the crankshaft that is normal for thermal expansion. The thrust pieces limit that movement to the range set by the engine design.
Are these the same as the main bearings?
No. Main bearings support the rotating journals, while these thrust pieces only control lengthwise movement and sit in a separate groove.




