Roller Boss Cover (5T072-2317-2)

Kubota DC70 roller boss cover listed as 5T072-2317-2 at ref 170 of the track roller figure. Verify the number on the removed part before ordering.

Roller Boss Cover 5T072-2317-2

5T072-2317-2 appears at reference 170 of the track roller figure as COVER,ROLLER BOSS, six per side, with O-ring 04816-06300 listed at reference 180 in a quantity of twelve. The cover closes the outer end of each roller and is the first thing to inspect when grease is escaping.

Catalogue data for 5T072-2317-2

Part Number5T072-2317-2
ProductRoller Boss Cover
Catalogue NameCOVER,ROLLER BOSS
FigureC10101 / C10102, sheets 101 and 102
Reference No.170
Q’TY per side6 covers
Machine ColumnDC-70G
Paired O-ring04816-06300, reference 180, quantity 12
ProtectsCollar and circlip stack at references 070 to 080

The end cap that keeps the roller sealed

The cover holds the O-ring against the roller end face and keeps the grease cavity closed while the roller turns. It also protects the collar and circlip stack from mud, and gives the grease nipple a clean face to work against. Because it is the outermost part, it takes the impact of stubble, stones and paddy soil.

Wear signs on a working machine

A failed cover shows as grease around the outside of the roller end, a cover that has been dented or pushed off its seat by impact, a cracked or missing O-ring, a cover that has rusted through, or a boss that has worn so the O-ring no longer seals. On machines working wet ground the first sign is usually a wet ring of mud at the end of the roller.

Comparison before ordering

Match the removed cover to 5T072-2317-2 and check the O-ring seat for a flat or damaged groove before ordering. The figure lists twelve O-rings against six covers, so confirm the count on the machine against the illustration rather than assuming one ring per cover.

Workshop notes

Fit a new O-ring whenever the cover is opened, clean the groove and seat, and seat the cover without forcing it out of square. Confirm the roller still takes grease through the nipple before the machine goes back to the field, because a cover fitted over a blocked passage hides the real problem.

Cover seating and O-ring choice

Dudukkan tutup dan pilihan O-ring

See the chassis track category for the full track group, and review the seal and complete roller unit linked here: Track Roller Oil Seal (5T070-2321-0), Track Roller Assembly (5T078-2310-0).