Welded Belt Pulley (220 mm) for FM WORLD 4LZ-6.0P
Built from welded parts for the unloading system, this 220 mm pulley at 1.9 kg with a 22 mm bore and 45 mm height moves the belt that carries grain out.
Welded pulley data
| Drawing number | W2.5B-04HX-17B-04-00 |
| Component | Welded belt pulley |
| Envelope | 220 mm across |
| Bore | 22 mm |
| Height | 45 mm |
| Mass | 1.9 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Moving the unloading belt
The welded pulley moves the unloading belt and its belt seat must keep the grain moving out without slip.
Welded versus cast build
Cast pulleys are solid in one piece, whereas this hub is fabricated from welded parts; the construction method differs.
Installing the welded pulley
Hang the welded pulley on the unloading shaft, guide the key home, and turn the hub manually to see that it clears the guard.
During unloading the grain belt must track straight off the welded hub without rubbing.
Conditions that condemn it
- Groove worn where the grain belt rides
- Shaft opening loose on the unloading shaft
- Web cracked around the hub
- Weld seam opened or peeling
- Belt wandering under load
- Rust spots along the welds
Pre-order checks
Mounting: Welded unloading pulley of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Provide the welded pulley drawing number and the 220 mm overall size.
Dimensions to match: Match the 22 mm shaft opening to the old welded pulley.
Engine and other pulleys
Welded pulley questions
What belt does it move?
It moves the belt that carries grain out.
Is it cast?
No, it is built from welded parts.
Identification of W2.5B-04HX-17B-04-00 before ordering
Replace the welded hub for a worn groove, loose shaft opening or opened weld; keep using it while the welds and groove stay intact.





