,

Chain Box Weld (W2.5B-04HX-22A-01-00)

Chain W2.5B-04HX-22A-01-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Chain Box Weld (Chain Housing) for FM WORLD 4LZ-6.0P

This welded chain box is the housing that encloses and guards the chain on the FM WORLD 4LZ-6.0P, 355 mm long and 255 mm wide with 50 mm bores and 70 mm height, weighing 2.4 kg. It carries the shaft bearings and keeps the chain covered.

Housing dimensions

Part numberW2.5B-04HX-22A-01-00
Part typeWelded chain box (housing)
Length / width355 / 255 mm
Bores50 mm
Height70 mm
Weight2.4 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

What the box protects

The box forms a rigid enclosure around the moving chain, shielding it from crop and debris and containing the lubricant, while the machined bores locate the shaft bearings and keep the chain and sprockets aligned.

Housing damage against a chain fault

A bent or cracked box can misalign the bearings and mimic a chain or bearing fault by making the loop run off the teeth. Inspect the housing for distortion before condemning the chain, since a misaligned box will destroy fresh parts.

Mounting and bores

Check the bores are round and the mounting faces are flat, then fit the bearings square and confirm the shaft turns freely before the cover is secured.

Tighten the fasteners evenly and confirm the chain clears the inside of the box through a full rotation, with no rubbing on the welds.

Inspection points

  • Cracks at the welds or mounting points
  • Distortion that pulls the shaft out of alignment
  • Worn or enlarged bearing bores
  • Rub marks where the chain contacts the inside
  • Rust or corrosion on the mounting faces
  • Loose fasteners that let the box move

Ordering details

Mounting: Bolted around the unloading chain of the FM WORLD 4LZ-6.0P, carrying the shaft bearings.

Verify: Verify part number W2.5B-04HX-22A-01-00 and the 355 / 255 / 70 mm dimensions.

Dimensions to match: Match the bores and mounting layout and confirm the chain clears the housing.

Related unloading parts

Common questions

Is the box a wear part?

It is a structural welded housing rather than a routine wear item, replaced mainly when cracked, distorted or worn in the bearing bores.

Why does its condition matter to the chain?

Its bores locate the bearings, so a distorted box misaligns the shaft and makes the chain run off the teeth and wear rapidly.

W2.5B-04HX-22A-01-00 identification before ordering

Read the part number on the housing and measure the bores and overall dimensions. If the marking is worn, send the number and a photo through the quote form and the correct box will be confirmed.

Request a Quote Now