,

Chassis Weld (W3.5H-03K(E)-01-00)

main chassis weld (structural frame). In-stock replacement for the FM WORLD harvester. Order by part number; contact us for exact fitment.

Chassis Weld W3.5H-03K(E)-01-00 — 3160 x 2035 x 1050 mm

The main chassis weld for the FM WORLD 4LZ-6.0P Ruilong: 3160 x 2035 x 1050 mm and 725 kg. This is the structural frame the engine, gearbox, threshing unit and complete undercarriage all mount to, and it is the largest single item in the chassis range.

Specifications

Part numberW3.5H-03K(E)-01-00
TypeMain chassis weld (structural frame)
Overall dimensions3160 x 2035 x 1050 mm
Weight725 kg
FitsFM WORLD 4LZ-6.0P (Ruilong) Combine Harvester
AvailabilityIn stock, ready to ship

What this part does

Every other assembly is positioned by this frame. The guide rails, tension arms and roller groups bolt to its faces, so those faces decide where the tracks sit relative to the drums and the header. A frame that is bent or cracked at a mount cannot be corrected downstream, because no amount of roller or rail adjustment moves the whole track line back to where it should be.

A structural frame against the wear parts that bolt to it

Rails, rollers and tension arms are wear items that can be renewed one at a time. At 725 kg and over three metres long, this frame is not: replacing it is a rebuild job that needs the machine stripped and the new frame lifted into place. That is why a cracked mount is worth inspecting properly before the wear parts around it are renewed.

Fitting notes

This frame is handled with lifting equipment on a pallet, not by hand, and the machine has to be supported and stripped before it is changed. Check the mounting faces and the weld seams for cracks and confirm the frame is square before the undercarriage is rebuilt onto it. Every fastener and alignment figure for the rebuild belongs to the service manual; do not work from memory on a frame this size.

Before you fit it

Have the frame inspected for cracks and squareness before the undercarriage goes back on. A distortion found later means stripping the machine twice.

Signs it needs replacing

  • Cracks starting at a weld seam or around a mounting hole
  • The frame bent or twisted so the tracks no longer run parallel
  • Elongated bolt holes that let a rail or roller group move in service
  • A previous repair that left the frame out of square

Compatibility and cross reference

Models covered

This frame is for the FM WORLD 4LZ-6.0P Ruilong. Frames differ between models, so confirm the machine and part number before ordering.

Confirming the right part

Match W3.5H-03K(E)-01-00 and the 3160 x 2035 x 1050 mm envelope. At 725 kg this is a freight item, not a parcel.

Reading the old part

The frame number is stamped on a plate at the chassis body, and the envelope it describes is 3160 x 2035 x 1050 mm. Confirm the number before any lifting is arranged.

Questions we are asked about this part

Can a cracked chassis weld be repaired in place?

Only by a welder working to the manufacturer’s procedure, and only after the crack is assessed. A crack at a load-bearing mount is not something to stitch and carry on with, since the frame sets the geometry for the whole undercarriage.

How is this part shipped at 725 kg?

On a pallet, by freight, with lifting points for a crane or forklift. Tell us the delivery address and we will confirm the freight arrangement before dispatch.

Related parts