,

Conveyor Chain Assy (W3.5H-01-02-09-00)

Chain W3.5H-01-02-09-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Conveyor Chain Assembly for FM WORLD 4LZ-6.0P Header

This is the complete conveyor chain assembly for the FM WORLD 4LZ-6.0P header, a 3180 mm loop with 14 carrying plates, measuring 455 mm across and weighing 27.1 kg. It is supplied as a ready-built assembly rather than a bare chain.

Assembly specification

Part numberW3.5H-01-02-09-00
Part typeConveyor chain assembly
Loop length3180 mm
Carrying plates14
Width455 mm
Weight27.1 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

What the conveyor loop does

The chain forms a continuous loop carrying the plates that sweep the cut crop through the header. As the drive sprocket turns, the links articulate at every joint and the plates move the material in a steady flow without it bunching or slipping back.

Assembly against a bare chain

Because the plates and links are built together, the assembly is used where the whole loop is worn or damaged, rather than rebuilding a bare chain and re-fitting old plates. Match the part number and plate count to the header width.

Installing the loop

Lay the loop over both sprockets and check the plates clear the housing, then join and tension it to the service manual value. Rotate by hand to confirm every link tracks the teeth.

Confirm the sprockets are not hooked before fitting, since a fresh assembly on worn teeth will wear quickly, and lubricate the joints as the manual specifies.

When the assembly is replaced

  • Elongated joints that let the chain jump the teeth
  • Stiff or seized links that snatch as they turn
  • Bent or worn carrying plates
  • Chain slap from loss of tension
  • Cracked or stretched link plates
  • Noise and uneven running around the sprockets

Ordering information

Mounting: Looped over the header sprockets of the FM WORLD 4LZ-6.0P, carrying 14 plates.

Verify: Verify part number W3.5H-01-02-09-00 and the 14-plate, 3180 mm loop.

Dimensions to match: Match the loop length, plate count and width to the header rather than only the chain size.

Related conveyor parts

Questions answered

Why choose the assembly rather than a chain?

The carrying plates are fitted and aligned at build, so a worn or damaged loop is exchanged as one unit rather than re-fitting old plates to a bare chain.

What is checked before fitting?

The sprocket teeth for hooking, the housing for clearance and the joint lubrication, then the tension is set to the manual.

W3.5H-01-02-09-00 identification before ordering

Read the part number and count the carrying plates, then measure the loop and width. If the tag is worn, send the number and a photo and the correct assembly will be confirmed.

Request a Quote Now