,

Eccentric Roller Assy (W2.0B-01B-01-05Q-12-00)

Part W2.0B-01B-01-05Q-12-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Eccentric Roller Assembly (45 mm) for FM WORLD 4LZ-6.0P Reel

This small eccentric roller is 55 mm long and 45 mm across on a 36 mm bore, 0.24 kg, fitted to the reel tine mechanism where its off-centre motion guides the tine path.

Roller measurements

Part numberW2.0B-01B-01-05Q-12-00
Part typeEccentric roller assembly
Length55 mm
Outer diameter45 mm
Bore36 mm
Weight0.24 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

What the eccentric does

The off-centre bore makes the roller describe a small eccentric motion as the reel turns, which is what sets the timing and travel of the guided tine rather than simply carrying a load.

Eccentric roller versus a plain one

A plain roller turns on a concentric bore, while this one is deliberately offset; fitting a concentric roller would remove the eccentric action the mechanism depends on.

Fitting the roller

Offer the roller to its pin and confirm it turns freely through the eccentric cycle, then check the guided tine moves on its full path without binding.

Turn the reel by hand and watch the roller follow the offset path; any flat spot shows as a hesitation in the tine movement.

Replacement signs

  • A flat or scored outer face
  • A worn or oval bore that loses the eccentric timing
  • Rough rotation with a hard spot
  • Noise or catching through the offset cycle
  • Tine movement that has become uneven
  • Corrosion on the roller surface

Ordering details

Mounting: Reel tine eccentric on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.

Confirmation: Quote the part number and the 45 mm and 36 mm measurements and note the eccentric bore.

Dimensions to match: Check the length, outer diameter and the offset bore against your removed roller.

Reel guide and mandrel parts

Buyer questions

Why does the bore need to be offset?

The offset produces the eccentric motion that drives the tine path; a concentric roller cannot do this.

Can a plain roller be used instead?

No, the mechanism calls for the eccentric part, and a plain roller would change the tine timing.

Identification of W2.0B-01B-01-05Q-12-00 before ordering

Replace this roller when the face is scored, the bore is worn or the eccentric timing is lost; a free-turning roller that gives an even tine path can stay.

Request a Quote Now