,

Arm Weld (W2.5E-01B-02-02-01-00)

Part W2.5E-01B-02-02-01-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Welded Conveyor Arm (400 mm) for FM WORLD 4LZ-6.0P

This larger welded arm is 400 mm long with a 205 mm arc and a 40 x 45 mm section, 1.5 kg, supporting the conveyor idler and its chain path.

Arm measurements

Part numberW2.5E-01B-02-02-01-00
Part typeWelded conveyor arm
Length400 mm
Arc205 mm
Section40 x 45 mm
Weight1.5 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

Supporting the idler

The arm holds the idler at the correct point on the conveyor return, and its longer reach keeps the chain guided where a short lever could not span the mounting.

Large arm versus the small tension arm

At 400 mm this is a structural arm rather than the 175 mm compact tension lever; match the length and the 205 mm arc rather than assuming the arms are common.

Fitting the arm

Bolt the arm at its pivot and confirm it swings through its travel, then fit the idler and check the chain sits centrally.

Set the chain tension and run the conveyor, watching the arm for flex or movement at the pivot.

Replacement signs

  • A cracked weld at the pivot or idler seat
  • A bent arm that misaligns the idler
  • Worn pivot bore
  • Visible flex under load
  • Chain walking off the idler
  • Rust thinning the arm plate

Ordering details

Mounting: Conveyor idler arm on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.

Confirmation: Quote the part number and the 400 mm length and 205 mm arc.

Dimensions to match: Check the length, arc, section and pivot against your removed arm.

Mandrel and tension arm parts

  • Part 2299
  • Buyer questions

    Is this the same as the small tension arm?

    No, it is much longer and carries the conveyor idler; the mountings and reach differ.

    Does the idler come with the arm?

    No, the idler is fitted separately; this is the welded arm only.

    Identification of W2.5E-01B-02-02-01-00 before ordering

    Replace this arm when it cracks, bends or wears its pivot; a rigid arm that keeps the idler aligned can stay.

    Request a Quote Now