,

Gear Shift Fork (ZKB60-106-500-01)

Gear shift fork for the ZKB85 gearbox. Part ZKB60-106-500-01. In-stock replacement for the FM WORLD 4LZ-6.0P (ZKB85) gearbox.

Gear Shift Fork (ZKB60-106-500-01) for the FM WORLD 6.0P

The fork that moves the sliding gear into and out of mesh in the ZKB85 gearbox on the FM WORLD 4LZ-6.0P. Listed at 80 x 65 x 65 mm and 0.2 kg, it is small, but it decides whether a gear stays engaged.

Specifications

Part NumberZKB60-106-500-01
Part TypeGear shift fork
Dimensions80 x 65 x 65 mm
Weight0.2 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
AvailabilityIn stock, ready to ship

What this part does

The fork holds the sliding gear at the position the operator selects. Its job is not to transmit torque but to keep the gear exactly where it belongs, and it does that with two fingers that wear on their inner faces as they push the gear back and forth. When those faces thin, the gear sits slightly out of full mesh: it still drives, until the load rises and pushes it back out of engagement.

Jumping out of gear: the fork or the gear

Both produce the same event, the machine dropping to neutral under load, but they come from opposite ends. A worn fork lets a sound gear slide back out of mesh; worn engagement teeth let a sound fork’s position be lost because the teeth no longer hold. Measure the fork fingers and look at the engagement teeth: the one that has changed is the one to replace.

Fitting notes

Check the fork fingers for thickness and for a bend, and check the groove in the sliding gear that the fingers ride in, since a worn groove wears a new fork quickly. Fit the fork on its shaft so it slides without binding and the gear reaches full mesh at both ends of the stroke. Shift travel is set per the service manual; we do not publish fork clearance figures.

Before you fit it

Inspect the groove in the sliding gear before fitting. A widened groove lets the new fork sit loose and the gear will still walk out of mesh.

Signs it needs replacing

  • Gear drops out under load, then re-engages when the load drops
  • Shifting feels vague or needs two attempts
  • Fork fingers worn thin, stepped, or bent
  • Fork rides out of the gear groove or shows a polished scar

Compatibility and cross reference

Models covered

Shift mechanism of the ZKB85 gearbox on the FM WORLD 4LZ-6.0P (Ruilong). ZKB60-106-500-01 is the fork; the rail it rides on is a separate number.

Confirming the right part

Confirm ZKB60-106-500-01 on the 80 x 65 x 65 mm envelope and on the distance between the fork fingers, which decides how the gear is held.

Reading the old part

The number sits on the fork body between the fingers. Measure the finger thickness as well, since that is what decides whether the gear stays in mesh.

Questions we are asked about this part

Why does the machine only jump out under load?

Because that is when the axial force pushing the gear out of mesh is greatest. A fork that is only slightly worn will hold at light load and let go exactly when the crop gets heavy.

Is it worth replacing just the fork?

Yes, if the fingers are worn and the gear groove and engagement teeth are still sound. Those are the usual case, and it is the cheapest way to stop a box that keeps dropping out of gear.

Related parts