Threshing Gearbox Assembly (W2.5-02-03-00-00) for the FM WORLD 6.0P
This is the gearbox assembly in the threshing drive, 185 x 130 x 110 mm and 3 kg. It contains the right-angle drive of the threshing section and is supplied as a complete, factory-set unit rather than as a loose housing.
Specifications
| Part Number | W2.5-02-03-00-00 |
|---|---|
| Part Type | Threshing gearbox assembly |
| Size | 185 x 130 x 110 mm |
| Weight | 3 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | In stock, ready to ship |
What this part does
Unlike the individual bevel gears, this assembly carries the housing, the gears and the bearings together, so its health is read from the outside in: seal condition and oil cleanliness first, then the noise and temperature of the box under work. A box that whines or runs hot has a mesh already opening, and metal in the oil confirms it. The mounting faces carry the same weight as the internals, because a box that shifts on its mounts misaligns the very gears it encloses. Fitting a complete assembly removes the need to set backlash on the machine, which is left to the factory.
Threshing gearbox against the unloading box
This box is the larger of the two assemblies at 185 x 130 x 110 mm and 3 kg, and it sits in the continuously running threshing drive; the unloading box is smaller and works only while the tank empties. Size and mounting identify them, and they are not interchangeable.
Fitting notes
Check the mounting faces, input and output flanges and seals before fitting, and confirm the shafts align without forcing the box. The oil is filled to the specified grade and level, and any backlash or preload checks follow the service manual rather than field adjustment.
Before you fit it
Because this drive runs continuously, temperature and oil condition matter more than on the intermittent unloading box. A hot box or dark, metallic oil is a failure rather than a service item.
Signs it needs replacing
- Steady whine or a box that runs hot
- Weeping seals or oil loss
- Metal particles in the gear oil
- Movement at the mounting faces under load
Compatibility and cross reference
Models covered
The threshing gearbox assembly in the continuously running threshing drive of the FM WORLD 4LZ-6.0P.
Confirming the right part
Confirm W2.5-02-03-00-00 at 185 x 130 x 110 mm and 3 kg. The smaller unloading box is a separate assembly.
Reading the old part
Measure the housing and check the flange pattern. The larger size and continuous-drive position identify it.
Questions we are asked about this part
Does this assembly need any internal setting on the machine?
No. The meshes are set in the factory and the box is fitted as a unit; the service manual covers mounting, alignment and oil, while field adjustment of the internal backlash is neither intended nor required.
How is this box distinguished from the unloading gear box?
By size and position: 185 x 130 x 110 mm here against 138 x 125 x 110 mm on the unloading box, and this one runs continuously in the threshing drive.





