Reverse Horn Switch JK635A (300 mm, 28 mm) for FM WORLD Combines
The JK635A reverse horn switch, 300 mm long with a 28 mm body and 0.1 kg, triggers the warning horn when the harvester is put into reverse.
Reverse switch data
| Part number | JK635A |
| Component | Reverse horn switch |
| Length | 300 mm |
| Body diameter | 28 mm |
| Mass | 0.1 kg |
| System | Warning and safety |
Triggering the reverse warning
When reverse gear is selected, the switch closes and sounds the warning horn so people nearby know the machine is moving backward.
Reverse switch against other controls
This is a dedicated safety switch for reverse only, whereas the combination and main switches handle general machine controls.
Mounting the horn switch
Fit the switch at the reverse linkage, connect the wiring, and adjust its position so it closes only when reverse is engaged.
After adjustment, select and release reverse and confirm the horn sounds and stops at the correct positions.
Reasons the warning fails
- Contacts failing to close
- Adjustment drifting so the horn stays on or stays silent
- Moisture and corrosion in the body
- Worn plunger or lever
- Damaged wiring
- Intermittent warning
What to verify
Mounting: Reverse warning horn switch for FM WORLD combine electrical systems.
Confirmation: Quote the JK635A number and confirm the 300 mm length, 28 mm body and 0.1 kg mass.
Dimensions to match: Match the mounting, connector and the 300 mm length to the old switch.
Related switches and relay
Common questions
Why does the horn stay on all the time?
The switch position or plunger is usually out of adjustment so it remains closed.
Is the horn included?
No, this is the switch that triggers the separate warning horn.
Identification of JK635A before ordering
Select the JK635A when the reverse warning is silent or constant; verify the horn itself and the adjustment before ordering.





